UDP 10G Stream (AMD KRIA)
Board-only socket of the AMD_KRIA 10G UDP stack: wires the diagram pins to the board signals SER10G_*. It instantiates nothing.
Introduction
The 10G stack (GTH 10GBASE-R on bank 224, Forencich eth/udp, udp_cmd_engine,
Clarity packet format, command port 1234 / data port 1235) is fixed board
infrastructure of board_AMD_KRIA and is always present. This block only
connects the diagram to its socket (CLK_ACQ domain):
| pin | dir | board signal |
|---|---|---|
TDATA (64) |
in | SER10G_S_TDATA |
TVALID |
in | SER10G_S_TVALID |
TLAST |
in | SER10G_S_TLAST (accepted, ignored) |
LEN_DATA (8) |
in | SER10G_LEN_DATA (datagram length in words, 1..128) |
LEN_VALID |
in | SER10G_LEN_VALID |
TREADY |
out | SER10G_S_TREADY (room for >= 16 words) |
LEN_READY |
out | SER10G_LEN_READY |
EMPTY |
out | SER10G_S_EMPTY (board FIFO empty, optional) |
The pins are the mirror of the Output Serializer (10G) pins: connect them
one to one. Write the words of a datagram first and its length last; without
LEN entries the board cuts 128-word datagrams with a flush timeout.
Pin Description
Usage
Place at most ONE instance: it drives the SER10G_* inputs of the top (two
instances would be multiple drivers). Without an instance the socket stays
idle and the command port still answers. Unconnected inputs are tied to 0.
Only available on board AMD_KRIA (BoardGUID E9A079DA-672B-4A06-A9EE-BF20E993BFDC).
MAC / IP / ports are board registers (BRD_NET_*, board README), not
properties of this block.
Resources & Timing
-
Latency: none (wires)
-
Throughput: one 64-bit word per CLK_ACQ clock into the board CDC FIFO
No logic, no registers. Verified: the generated wrapper assigns exactly the eight SER10G_* nets with the board types (tb/kria_serializer, stub case).